Metra Electronics 99-7337B User Manual

Details the specific vehicle models and years this kit is compatible with, focusing on Kia Soul 2010-11.

Lists the key features of the installation kit, including DIN/ISO radio provisions and finish.

Identifies the physical parts included in the kit, such as radio housing and ISO brackets.

Specifies the necessary wiring harnesses and antenna adapters required for installation.

Lists the essential tools needed to perform the installation procedure correctly.

Instruction to disconnect the negative battery terminal to prevent accidental short circuits.

Steps to unclip and remove the vehicle's radio and climate control trim panel.

Guidance on removing Phillips screws securing the climate control unit.

Instructions for removing the Phillips screws that secure the factory radio.

Procedure for attaching the provided ISO brackets to the radio housing.

Steps for sliding the aftermarket head unit into the bracket/housing assembly.

Guidance on locating the factory harness and using the correct mating adapter.

Instruction to reassemble the vehicle's dash in the reverse order of disassembly.

Detailed steps for making final wiring connections using the EIA color code chart.

Procedure to reconnect the negative battery terminal and test the installed unit.

Final steps for reassembling all dash and radio components in reverse order.