Metra Electronics 99-7326 User Manual

2
99-7326 KIT ASSEMBLY
B
A
DIN RADIO PROVISION WITH POCKET
Slide the aftermarket radio into the
cage until it snaps into place.
(Figure B)
2
Snap the trim plate into the Radio
Housing.
(Figure B)
3
Note: The trim plate supplied with the
99-7326 is required for a complete
installation. ISO mounting may be pre-
ferrred as it is easier than DIN mount-
ing and using this trim plate.
Continue to final assembly.
*Note: Refer also to the instructions included with the aftermarket radio.
Slide the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs outward. (Figure A)
1

Metra Electronics 99-7326 Specifications

General

Brand	Metra Electronics
Model	99-7326
Category	Automobile Accessories
Language	English