EasyManua.ls Logo

Metra Electronics 99-8153 User Manual

Default Icon
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INSTALLATION INSTRUCTIONS FOR PART 99-8153
APPLICATIONS
LEXUS LS SERIES
1995-2000
NOT FOR USE IN VEHICLES
WITH FACTORY NAVIGATION
KIT FEATURES
DIN Radio Provision with Pocket
ISO Mount Radio Provision with Pocket
A) Radio Housing • B) Radio Housing Brackets • C) ISO Brackets • D) Trim Plate
KIT COMPONENTS
A
B
TOOLS REQUIRED:
Small Flat Blade Screwdriver/ Panel Removal Tool
Phillips Screwdriver • Socket Set
99-8153
C
D
Question and Answer IconNeed help?

Do you have a question about the Metra Electronics 99-8153 and is the answer not in the manual?

Metra Electronics 99-8153 Specifications

General IconGeneral
BrandMetra Electronics
Model99-8153
CategoryCar Video System
LanguageEnglish

Summary

Kit Overview and Applications

Vehicle Applications

Specifies the Lexus LS Series models (1995-2000) for which the kit is intended.

Usage Restriction

Important note that the kit is not for use in vehicles equipped with factory navigation.

Kit Features and Components

Details the key features like DIN/ISO radio provisions and lists the included kit components.

Required Tools

Lists the necessary tools for performing the installation, including screwdrivers and socket sets.

Dash Disassembly Procedure

Battery Disconnection

Instruction to disconnect the negative battery terminal to prevent short circuits.

Center Console Panel Removal

Steps to pry and remove the panel surrounding the shifter including the ashtray.

A/C Vent and Clock Assembly Removal

Procedure for gently prying out and removing the A/C vent assembly with the clock.

Factory Radio/Climate Control Removal

Removing screws and unplugging the factory radio/climate control assembly.

Climate Control Module Separation

Removing the climate control unit from the main assembly for later re-use.

Kit Preparation

Bracket Attachment

Sliding the appropriate bracket onto the 99-8153 kit until side clips engage.

Factory Climate Controls Installation

Aligning and securing the factory climate controls into the kit using alignment pins and hardware.

DIN Radio Installation

DIN Cage Securing

Sliding the DIN cage into the Radio Housing and bending tabs outward for security.

Aftermarket Radio Mounting

Sliding the aftermarket radio into the installed cage until it snaps into place.

ISO Mount Radio Installation

ISO Bracket Mounting

Mounting the ISO brackets to the aftermarket radio using supplied screws.

Radio into Housing Installation

Sliding the radio with attached brackets into the radio housing until it snaps.

Trim Plate Attachment

Attaching the radio housing trim plate supplied with the kit to the assembly.

Final Assembly and Wiring

Wiring Harness Connections

Locating the factory harness and making connections using a mating adapter and recommended methods.

Wiring Color Code

Reference chart for Metra/EIA wiring color codes for accurate connections.

Battery Reconnection and Testing

Reconnecting the negative battery terminal and testing the unit for proper operation.

Dash Reassembly

Reassembling the radio and dash components in the reverse order of disassembly.

Related product manuals