Metra Electronics 99-8723B User Manual

CAUTION! All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
Metra. The World’s Best Kits.
®

MetraOnline.com © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION REV. 09/27/17 INST99-8723B
INSTALLATION INSTRUCTIONS
99-8723B
KIT FEATURES
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Painted matte black
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (8) #8 x 3/8” Phillips screws
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• T-20 Torx driver
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly
–ISO DIN radio provision with pocket ..................3
–ISO DDIN radio provision .....................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Please visit metraonline.com for additional
adapters and accessories.
A B C D
Mercedes-Benz ML 2006-2011

Metra Electronics 99-8723B Specifications

General

Brand	Metra Electronics
Model	99-8723B
Category	Automobile Accessories
Language	English

Summary

KIT FEATURES

ISO DIN Radio Provision with Pocket

Describes the ISO DIN radio provision with an included pocket for installation.

ISO DDIN Radio Provision

Details the ISO DDIN radio provision capability for the vehicle.

Painted Matte Black Finish

Notes the finish of the trim panel as painted matte black.

TOOLS REQUIRED

Panel Removal Tool

Lists a panel removal tool as a required item for installation.

Phillips Screwdriver

Specifies a Phillips screwdriver as a necessary tool for the installation process.

T-20 Torx Driver

Identifies a T-20 Torx driver as an essential tool for specific fasteners.

SAFETY CAUTION

Connection and Ignition Safety

Warns to connect all accessories before ignition and not to remove the factory radio with the key on or engine running.

DASH DISASSEMBLY

Remove Climate Controls

Instructions for unsnapping and removing the vehicle's climate control unit.

Remove Radio Retaining Screws

Details on removing T-20 Torx screws from the radio retaining tabs.

Release Factory Radio

Steps to push down on retaining tabs to detach the original factory radio.

KIT ASSEMBLY

ISO-DIN Radio Provision with Pocket Assembly

Steps for assembling the ISO-DIN radio provision with pocket, including brackets and trim.

ISO-DDIN Radio Provision Assembly

Steps for assembling the ISO-DDIN radio provision, attaching brackets and securing the radio.

INSTALLATION SUPPORT AND IMPORTANT NOTES

Tech Support Contact Information

Information on contacting Metra Tech Support for installation difficulties and preparation before calling.