Metra Electronics 99-8227S User Manual

APPLICATIONS
KIT FEATURES
KIT COMPONENTS
TOOLS REQUIRED
METRA. THE WORLD’S BEST KITS.™
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION
1-800-221-0932 metraonline.com
INSTALLATION INSTRUCTIONS FOR PART 99-8227S
TOYOTA 4 RUNNER
2010
99-8227S
DIN Head unit provisions with pocket
ISO DIN Head unit provision with pocket
DDIN Head unit provision
ISO Stacked Head unit provision
Painted matte silver to match factory dash
Wiring & Antenna Connections (Sold Separately)
• TYTO -01 Toyota Interface 2006-UP
•70-1761 Toyota Harness
• A) Radio Housing • B) ISO Brackets • C) ISO Trim Plate • D) DDIN Brackets
• E) DDIN Trim Plate • F) Pocket • G) (4) PC-7503 Panel Clips • H) (2) Phillips Screws
• Phillips Screwdriver • Panel Removal Tool • Small Flat Blade Screwdriver
• Small Socket Set
AB
C
D
F
GH
E

Metra Electronics 99-8227S Specifications

General

Manufacturer	Metra Electronics
Part Number	99-8227S
Product Type	Dash Kit
Color	Silver
Material	Plastic
DIN Size	Double DIN
Installation	Vehicle-specific installation

Summary

Product Overview

Kit Features

Lists features of the installation kit, including head unit provisions and finish.

Kit Components

Details the physical parts included in the installation kit, labeled A through H.

Tools Required

Lists the necessary tools for performing the installation process.

Dash Disassembly

Climate Control and Radio Removal

Steps to unclip trim panels, remove climate control, and remove radio mounting bolts.

Vent and Trim Panel Removal

Steps to remove vents, top trim panel, a/c vent trim, and hazard switch.

Kit Preparation

Radio Housing Assembly

Attaching trim pieces, vents, and panel clips to the radio housing.

Kit Assembly

DIN Head Unit Provision

Instructions for installing a single DIN head unit using the provided cage and pocket.

ISO DIN Head Unit Provision

Steps for installing an ISO DIN head unit with brackets and trim plate.

Double DIN Head Unit Provision

Guide for installing a Double DIN head unit or stacked ISO units.