Need help?Do you have a question about the METREL EurotestXD MI 3155 and is the answer not in the manual?
General| Model | MI 3155 |
|---|---|
| Continuity testing | Yes |
| Insulation resistance | Yes |
| RCD testing | Yes |
| Loop / Line impedance | Yes |
| Earth resistance | Yes |
| Earth Resistance Range | 0.01 Ω to 20 kΩ |
| Illumination | Yes |
| EVSE AUTO SEQUENCE | Yes |
| Automatic test sequences | Yes |
| PC software | Yes |
| Bluetooth | Yes |
| Power Supply | Rechargeable battery |
| Protection Class | IP 54 |
| Type | Multifunction Installation Tester |
| Measurement Category | CAT III 600 V; CAT IV 300 V |
| Measurement Functions | Continuity, Insulation resistance, RCD testing, Loop/Line impedance, Voltage, Frequency, Earth resistance |
| RCD Trip Time | 0 ms - 2000 ms |
| RCD Trip Current | 10 mA - 1000 mA |
| Voltage | 0 to 600 V AC/DC |
| Operating Temperature | -10 to +50 °C |
| Storage Temperature | -20 °C ... 70 °C |
Details how to perform and interpret insulation resistance measurements.
Explains measurement of earth connection and equipotential bonding resistance.
Covers tests for Residual Current Devices (RCDs).
Explains measurement of fault loop impedance and prospective fault current.
Provides technical specifications for insulation resistance measurements.
Lists technical specifications for fault loop impedance measurements.
Details technical specifications for line impedance measurements.
Lists technical specifications for voltage drop calculations.
To Next Page