17/12/09 Aura User Manual Issue 5
Health and Safety Instructions for Machine
Operation and Servicing
1. Due to the weight of a full coin box, it is essential that both hands are
used when removing this item.
2. When it is necessary to exchange any component part of the machine, it
is essential the main electrical supply is isolated.
3. Emergencies (electrical shock).
M. If the casualty is touching a live conductor, if the switch is near,
switch off the electricity before you touch the casualty. If you
cannot readily disconnect the electrical supply take the
following precautions before touching the casualty.
Cover your hands with something which will not conduct electricity.
Rubber Gloves, a DRY Macintosh or other article of DRY clothing.
Note: It must be remembered that wet rubber articles are useless
if moisture on the surface makes contact with wet clothing or skin.
b) Stand on a DRY non-conducting material, if you can, such as a
rubber mat, thick carpet, a piece of wood or glass.
c) If none of the above items are available, pull or push the
casualty clear with a dry rope or wooden pole. DO NOT use
anything made of metal.
d) Call an ambulance.
To Next Page
Loading...