This unit was designed in compliance with the EMC standards in force and its
compatibility has been tested in accordance with the following standard :
•
Emission (cl. A) and Immunity NF EN 61326-1 (1997) ; A1 (1998); A2 (2001)
•
Max. influence in electro-
magnetic fields at 3 V/m
acc. to EN 61000-4-3, 1997
3 % end of scale on V
DC
, V
AC
, A
DC
, A
AC
3 % end of
scale on V
DC
, V
AC
, A
DC
, A
AC
capacity ranges
Sealing
IP 67 acc. to NF EN 60 529 : 1992
Resistance
Fall resistance as per EN/IEC 60079-0 (2004)
Impact resistance as per EN/IEC 60079-0 (2004)
Heat resistance as per EN/IEC 60079-0 (2004)
Power supply
9 V alcaline battery (6LF22, 6LR61) battery life 100 hours in V
DC
mode
This multimeter must be fitted with certified batteries, such as :
CAUTION: The temperature class depends on the battery used.
Measurement rate
Digital display 2 measurements/s
Bargraph 20 measurements/s
Display
Liquid crystal display comprising :
- a 50 000-point display + sign (digits 14 mm high),
- a 34-bar analogue bargraph display,
- appropriate units for each type of measurement,
- triggered mode indicators (relative, ranging),
- battery discharged indicator.
Mechanical
Dimensions 189 x 82 x 40 mm Weight 400 g
Packaging
Dimensions 230 x 155 x 65 mm Weight 500 g
6.1. Accessories and documentation supplied with the multimeter
Set of test leads with safety probes
Intrinsically safe spare fuse (0.5 A, 125 V)
Operating manual
EC type Examination Certificate
LCIE certificate of conformity
Test report,
Carrying case
Certified battery
Gaseous explosive
atmosphere
Combustible dusty
atmosphere
DURACELL PROCELL
T5
91°
°°
°C
POWER LINE
T4
103°
°°
°C
ANSMANN
T4
112°
°°
°C
SANYO
T4
123°
°°
°C
ENERGIZER
T4
124°
°°
°C
POWER ONE
T3
133°
°°
°C
To Previous Page
Loading...
Need help?
General
