To Next PageTo Next Page
Need help?Do you have a question about the Metrix MTX 3250 and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Max Current | 10 A DC / AC |
| Resistance Measurement | Yes |
| Capacitance Measurement | Yes |
| Frequency Measurement | Yes |
| Battery | 9V |
| Continuity Test | Yes |
| Diode Test | Yes |
| Frequency Ranges | 10 Hz to 10 MHz |
| Safety Category | CAT III 600V, CAT II 1000V |
| Display | LCD |
| Max Voltage | 1000 V |
| DC Voltage Ranges | 1000 V |
| AC Voltage Ranges | 200 mV to 750 V |
| DC Current Ranges | 10 A |
| AC Current Ranges | 10A |
| Battery Type | 9V |
Brief overview of the multimeter and its purpose.
Guidelines for safe operation and installation environment.
Visual representation of the multimeter's front panel.
Illustration of the input terminals for measurements.
Visual representation of the multimeter's rear panel.
Detailed explanation of the front panel controls and indicators.
Explains the function of secondary selection keys.
Describes the keys for activating different instrument modes.
Details the measurement input terminals and their functions.
Information about the multimeter's display and its segments.
Explains symbols shown on the main and secondary displays.
Steps to take before operating the multimeter for the first time.
How to select the primary measurement functions.
Explanation of AUTO, AUTO PK, and MANU range selection modes.
How to select secondary measurement functions on displays.
How to display measurement tolerance specifications.
How to activate and use modes like HOLD, AUTO HOLD, REL, REF, SURV.
How to record measurements and manage stored data.
How to transfer measurements using the PRINT mode.
How to control the multimeter remotely via a PC.
Behavior and conditions for automatic standby mode.
How to perform mathematical operations on measurements.
How to configure instrument settings and preferences.
Details about the rechargeable battery pack and its management.
Specifications for AC and DC voltage measurements.
Specifications for DC and AC current measurements.
Specifications for resistance measurements.
Specifications for continuity testing.
Specifications for diode testing.
Specifications for frequency measurements.
Specifications for capacitor measurements.
Specifications for temperature measurements using Pt sensors.
Covers Quick PEAK, dB, and Resistive Power measurement specs.
Covers environment, mains, and battery power supply details.
Specifications for the LCD display.
Details safety compliance and electromagnetic compatibility standards.
Physical dimensions and material of the instrument's housing and packaging.
List of accessories supplied with or available for the instrument.
