Need help?Do you have a question about the metso automation neles NP Series and is the answer not in the manual?
General| Brand | metso automation |
|---|---|
| Model | neles NP Series |
| Category | Valve Positioners |
| Language | English |
General description of the NP700 positioner's application.
Explains the force balance principle of the positioner's operation.
Details the information found on the positioner's ID plate.
Lists key technical specifications like signal pressure ranges and supply pressure.
Lists CENELEC, CSA, and FM approvals for NP700/B construction.
Information on recycling and disposal of the positioner.
Crucial safety warnings regarding performance limitations and pressurized parts.
General mounting information and ordering of mounting parts.
Explains how to turn the changeover piece for different functions.
Describes signal ranges and arrow indicators on the cam plate.
Instructions for positioning the changeover piece (D or R).
Step-by-step guide for performing the basic adjustment of the positioner.
Details on marking and setting the cam plate for dead angle adjustment.
How to perform split-range adjustments using the cam plate.
Instructions for supply air filter, pilot valve, and diaphragm maintenance.
Overview of available options like flameproof, natural gas, dust-proof, and pressure gauges.
Visual representation of components and their associated part numbers.
Lists mounting parts for specific actuator models (B1C6-502, B1J8-322).
Lists mounting parts for Quadra-Powr actuators.
Lists mounting parts for specific actuator models (B1C6-20, B1J8-20).
Lists mounting parts for specific actuator models (B1C25-502, B1J25-322).
To Next Page