Metso HP Series User Manual

© Metso
-
Determinin. Seatin. S(rfa/e *ear
NOTE:
The
distance
between
the
ad.ustment
ring
and
main
'rame
should be %eriodically measured to determine i' there is any noticeable
main 'rame seating sur'ace wear"
0e%lace
the sea
t liners
when th
e initial
measurement
is red
uced by
1mm"
Mark 2& )& 3& etc"
Main Frame
2d.ustment 0ing
Measure and
0ecord This
+imension

Metso HP Series Specifications

General

Series	HP Series
Hydraulic Adjustment	Yes
Power	Varies by model (HP100 - HP900), refer to specific model datasheet
Technology	Cone Crusher
Features	Advanced automation, Hydraulic adjustment
Crushing stages	Secondary, Tertiary
Suitable materials	ore
Capacity	Varies by model (HP100 - HP900) and material, refer to specific model datasheet
Weight	Varies by model (HP100 - HP900), refer to specific model datasheet
Feed Opening	Varies by model (HP100 - HP900), refer to specific model datasheet
Closed Side Setting (CSS)	Varies by model (HP100 - HP900), refer to specific model datasheet
Automation	Yes, includes IC70C automation system
Crusher Liners	Manganese steel or other wear-resistant materials