Slurry Pump
WH15AM1AAA0EN_06B.DOC JAN 05-W02
Installation
8/8
• A drain valve should be incorporated in the inlet pipe. A floor channel should also be
provided directly beneath it for recovering the waste slurry.
• Secure the pump inlet and outlet pipes separately to avoid unnecessary transmission
of vibrations, forces or moments to the pump.
• Use expansion joints for high-pressure applications.
6.6 Shaft gland
See Care and Maintenance, Section 9, for specific installation instructions.
6.7 Motor and drive
See Care and Maintenance, Section 9, for specific installation instructions.
To Next Page
Loading...
Need help?
General
