Slurry Pump
WH23AM1S010EN_03C.DOC JAN 04-W08
Spare parts
1/1
10 SPARE PARTS
10.1 Recommended stock of spares
To reduce the length of time a pump is out of service, it is advisable to always keep in
stock a set of the recommended spare parts listed in this section. Please refer to the table
below for part item number references.
Item Part Reference
Case (complete volute) W1
Impeller W3
Back-liner W4
Shaft sleeve G2
Gland packing G5
Expeller ring G7
Expeller G15
Bearing cylinder assembly B99
Set of seals B98
10.2 Storage of spares
See section 1.2.5.
10.3 Spares ordering procedure
To assist our Spares Department process your order quickly, customers are requested to
provide the following information when ordering spares:
• Model and Size of pump
• Serial Number
• Build Number
• Approximate date of purchase
• Part Number and Description of Required Spare Parts
This information should then be forwarded to the local Metso Minerals branch for action - -
see sub-section 1.4.
To Next Page
Loading...
Need help?
General
