Need help?Do you have a question about the Mettler Toledo PS60 and is the answer not in the manual?
General| Capacity | 60 kg |
|---|---|
| Interface | RS232 |
| Power Supply | AC Adapter |
| Display | LCD |
| Calibration | External |
| Material | Stainless Steel |
| Protection Class | IP54 |
Warning regarding radio frequency energy emission and potential interference.
Provides contact information and a disclaimer about product changes.
Outlines essential safety warnings and cautions for operating the equipment.
Lists the standard features included in each PS shipping scale model.
Details various optional accessories available for the PS shipping scales.
Outlines the general specifications for the PS shipping scales.
Provides detailed physical dimensions for PS60/PS6L and PS2+ models.
Describes the power input range and power supply options for the PS scales.
Specifies the operating and storage temperature and humidity ranges.
Lists the various standards and regulations the PS scales comply with.
Details the electrical connections and interface diagram for the PS scale.
Instructions for inspecting the package and unpacking the scale.
Steps for placing and leveling the scale in a suitable environment.
General information needed for installation, calibration, and operation.
Describes the PS scale's LCD display, digits, and cursor positions.
Explains the functions of the UNITS and ZERO keys in different modes.
Guide for selecting the location code for initial calibration using GEOCAL™.
Details the sequence the scale follows upon power application or from sleep mode.
Procedures for performing a full calibration of the PS scale.
Instructions for installing a wire seal for W&M requirements.
Information needed to configure setup parameters for the PS scale.
Explains how to access operational parameters through program blocks.
Describes the options available for exiting the setup mode.
Configures the range for capturing zero with the push button.
Enables or disables the center of zero indicator on the PS.
Selects active units for the PS upon startup.
Chooses capacity and increment size based on model and power-up units.
Enables or disables unit switching during normal operation.
Configures the mode used to display weight.
Configures the noise filter for determining weight stability.
Sets the baud rate for data transmission.
Selects the number of bits per ASCII character.
Selects the parity option for data transmission error checking.
Selects the number of stop bits for ASCII character transmission.
Selects a pre-configured set of scale commands.
Configures the sleep timer to reduce power consumption.
Enables the GEOCAL™ prompt at power-up.
Provides information on activating GEOCAL™ and calibrating the PS.
Saves configuration and exits setup mode.
Describes the PS scale's keypad and LCD weight display.
Lists primary operator functions like parcel weighing and unit switching.
Step-by-step instructions for weighing parcels on the scale.
How to view scale weight in primary and alternate units.
Procedure for re-zeroing the PS scale when needed.
How to awaken the unit from its power-saving sleep mode.
Guidelines for cleaning and maintaining the PS shipping scale.
Information and steps to help diagnose and resolve problems.
Explains error codes displayed by the weight indicator.
Information on testing and replacing the wall transformer.
Details regarding the main PCB and its connections.
Troubleshooting steps for a blank or partially displayed screen.
Steps to diagnose and resolve issues with keypad responsiveness.
Troubleshooting for a locked indicator or display.
Part numbers and guidance for replacing the load cell.
Instructions for installing the D-cell battery kit.
Procedure for installing an optional base mount display unit.
Steps for installing the optional ball top transfer platter.
Diagram and parts list for PS60 and PS6L scale components.
Diagram and parts list for PS2+ scale components.
Diagram and parts list for the weight display unit.
Supported communication parameters for RS-232 serial port connection.
Information on programmed scale protocols for host communication.
Table of ASCII characters with their decimal, hexadecimal, and binary values.
Lists host commands and expected scale responses for Toledo protocol.
Defines the bits within the scale status byte for motion and capacity conditions.
Defines the bits within the confidence byte for RAM, ROM, EEPROM tests.
Instructions for calibrating the scale via the host interface.
Steps to configure scale parameters remotely using the host interface.
To Next Page
