Need help?Do you have a question about the Mettler Toledo XPR series and is the answer not in the manual?
General| Weighing Pan Size | Varies by model, up to Ø 90 mm |
|---|---|
| Interfaces | USB, Ethernet, RS232 |
| Display | Color TFT touchscreen |
| Calibration | Internal / external |
| Features | LevelControl |
| Power Supply | 100 - 240 V AC, 50/60 Hz |
| Humidity | 15% to 80% non-condensing |
| Settling Time | Varies by model, typically 2-3 s |
| Operating Temperature | 10°C to 40°C (varies by model) |
Lists and explains the numbered components of the balance unit.
Identifies and explains the keys and display elements of the terminal.
Explains the meaning of hazard symbols, signal words, and general product safety guidelines.
Details intended use, user responsibilities, and specific safety precautions.
Outlines the legal and safety duties of the balance's owner and trained personnel.
Highlights immediate hazards, especially electrical, and essential precautions.
Advises on using only approved components to prevent damage and ensure safety.
Provides a high-level overview of the balance's main functional areas and the primary operational screen.
Details the layout and elements of the primary operational screen for weighing tasks.
Explains how to navigate through lists displayed on the terminal screen using scrolling.
Describes the procedure for opening and interacting with screen drawers for menu access.
Instructions for unpacking, checking contents, and initial setup overview.
Provides criteria for selecting an optimal and safe installation site for the balance.
Step-by-step instructions for physically putting the balance together.
Procedure for establishing the connection between the terminal and the weighing unit.
Instructions for safely powering the balance from the electrical supply.
Covers initial power-on, EULA acceptance, and leveling the balance for accurate operation.
Guides through zeroing, taring, and completing the first weighing process.
Instructions for putting the balance into standby mode and switching it off.
Guidelines and precautions for cleaning the balance components.
Regulations and recommendations for environmentally responsible disposal of the equipment.
Details on power supply, operating environment, and materials used in the balance.
Lists safety certifications, EMC standards, voltage ratings, and construction materials.
To Next Page
