Need help?Do you have a question about the Mettler Toledo BC Series and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Interface | RS232 |
| Power Supply | AC Adapter |
| Material | Stainless steel |
| Units of Measurement | g, kg, lb, oz |
| Calibration | External |
| Protection Rating | IP65 (varies by model) |
Identifies the BC scale model based on capacity, battery option, and market.
Explains how to interpret symbols, key designations, and display messages in the manual.
Emphasizes reading and following all safety precautions and warnings in the manual.
Guides experienced users through scale setup steps.
Provides detailed instructions for new users to unpack and set up the BC scale.
Details the process of unpacking the BC scale and checking components.
Explains how to remove the lock-down screw on the BC05 model before use.
Provides guidance on choosing an optimal location for the BC counting scale.
Explains how to level the scale using its adjustable feet for accurate weighing.
Details how to connect the AC adapter and power the BC counting scale.
Describes the function of each key on the BC counting scale keyboard.
Explains the layout and functions of the BC counting scale's liquid crystal display.
Details the procedure for turning the BC counting scale on and off.
Explains how to reset the scale to zero for accurate measurements.
Describes how to subtract the weight of a container for net weight measurements.
Explains how to sample pieces to determine average piece weight for counting.
Details how to send counting results to a printer.
Explains how to exit the counting mode and return to weighing.
Describes how to change the displayed weight units (e.g., lb to kg).
Explains how to track totals of gross weight, net weight, and piece count.
Details how to recall stored weighing and counting data.
Shows how to quickly access specific data fields for recall.
Explains the guided counting sequence provided by the dependent mode.
Describes the flexible counting sequence available in independent mode.
Details the method where sample pieces are added and not removed.
Explains the method where sample pieces are removed from the scale.
Explains how to select different sample quantities for APW calculation.
Describes the mode where the sample quantity cannot be changed.
Shows how to display the percent of accuracy for APW calculation.
Explains automatic clearing of tare and APW after transactions.
Describes how to improve APW accuracy by using larger samples.
Explains how to track totals of gross weight, net weight, and piece count.
Details how to manually clear accumulated totals.
Explains how to print counting transaction results.
Describes how to operate the scale using the optional internal battery pack.
Provides steps for replacing the scale's internal battery.
Offers recommendations for cleaning and maintaining the BC counting scale.
Lists common display messages and error codes with their meanings and actions.
Lists technical details including capacity, weight, dimensions, and temperature.
Lists the key standard features of the BC counting scales.
Describes optional accessories available for the BC counting scale.
Provides an overview of parameters configurable in the Master Mode.
Explains how to connect the BC counting scale to a printer via RS-232.
To Next Page
