Need help?Do you have a question about the Metz Mecablitz 54 MZ-3 and is the answer not in the manual?
Attaching the flash unit to the camera securely.
Information on suitable batteries and power sources for the flash unit.
Procedures for turning the flash unit on and off.
Explains the general approach to operating the flash unit and its controls.
Details various sub-modes available within the TTL flash mode.
Lists and explains the sub-modes available in the automatic flash mode.
Details the M-HSS sub-mode for high-speed synchronization.
Using the secondary reflector for bounce flash photography.
Applying bounce flash techniques in Auto and TTL modes.
Applying bounce flash techniques in manual mode.
Using TTL remote control wirelessly with Metz flashes.
Using Auto remote control wirelessly with Metz flashes.
Using modeling light to assess lighting in remote modes.
Applying fill-in flash in TTL mode, including camera-specific features.
Applying fill-in flash in automatic mode.
Using audible signals for flash status and exposure confirmation.
How to lock/unlock buttons and settings to prevent accidental changes.
Setting the flash to turn off automatically after a period of inactivity.
Using second curtain sync for capturing motion blur effects.
Using modeling light to preview flash output and shadows.
Adjusting the flash's zoom reflector to match camera lens focal length.
Taking a series of shots with varying flash exposure compensation.
Resetting the flash to its default factory settings.
Automatic adjustment of the zoom reflector based on camera focal length.
Switching distance units between meters and feet.
General| Power Source | 4 x AA batteries |
|---|---|
| TTL | Yes |
| Guide Number | 54 |
| Zoom Range | 24-105mm |
| Tilt | Up to 90 degrees |
| Compatibility | Various camera systems |
| Flash Modes | TTL, Manual, Multi, Stroboscopic |
To Next Page