Need help?Do you have a question about the Metz mecablitz 52 AF-1 and is the answer not in the manual?
Highlights critical safety warnings and precautions for user safety.
Instructions for attaching and detaching the flash unit to a camera.
Explains the TTL flash mode where the camera controls flash exposure via preflashes.
Controls the motorized zoom reflector for adjusting the light beam angle.
Configures the flash unit to act as a master controller for remote slave units.
Configures the flash unit to act as a slave unit controlled wirelessly by a master unit.
Performs a test flash to verify remote flash system functionality and settings.
A simple slave mode that triggers a flash upon receiving a light pulse.
Adjusts the reflector's zoom position for different lighting effects and coverage.
General| Flash Type | TTL Flash |
|---|---|
| Power Source | 4 x AA batteries |
| Flash Modes | TTL, Manual, Multi |
| High-Speed Sync | Yes |
| Wireless TTL | Yes |
| AF Assist Light | Yes |
| Firmware Upgrade | Yes |
| Guide Number | 52 |
| Bounce Angle | 90 degrees |
| Swivel Angle | 180 degrees |
| Recycling Time | 0.5 to 5 Seconds |
| Weight | 360 g (without batteries) |
| Zoom Range | 24 - 105 mm |
| Compatibility | Canon, Nikon, Olympus, Panasonic, Pentax, Sony |
To Next Page
