Need help?Do you have a question about the Metz MECABLITZ 44 AF-1 and is the answer not in the manual?
Covers the initial steps to get the flash unit ready for operation.
Step-by-step guide on how to attach and secure the flash unit to the camera.
How to interpret the LED that indicates the flash is ready to fire.
Information on the LED that signals correct exposure in TTL modes.
Explains how the illuminated LED indicates the currently configured flash mode.
Details TTL flash modes that use preflashes for metering and exposure calculation.
How the reflector automatically adjusts its position based on the lens focal length.
How to use bounce flash to create softer lighting and reduce harsh shadows.
Using the integrated reflector card for specific lighting effects, like catchlights.
How the camera automatically adjusts shutter speed for flash synchronization.
Details the standard first curtain synchronization for flash firing.
How to update the flash unit's firmware for improved functionality.
General| Type | Slave flash |
|---|---|
| Flash modes | Fill-in, Manual |
| Product color | Black |
| Color temperature | 5600 K |
| Flash guide number | 44 m |
| Approx. number of flashes | 220 - 450 |
| Approximate recycling time | 4 s |
| Auto Focus (AF) assist beam | Yes |
| Camera brands compatibility | Canon |
| Brand specific flash systems | E-TTL I (Canon), E-TTL II (Canon) |
| Number of batteries supported | 4 |
Weight and Dimensions| Depth | 106 mm |
|---|---|
| Width | 73 mm |
| Height | 130 mm |
| Weight | 306 g |
To Next Page