•
™
Line Array Meyer Sound Laboratories Inc
Figure 27 shows an LD-2 line driver configured to
produce the same results as the LD-1A line driver shown
in Figure 26. The comparison plot when using these
configurations is shown Figure 28.
Figure 26. M3D and M3D-Sub headroom optimization using an LD-1A line driver
MID-HI OUTPUT (LOW CUT OUT, ARRAY EQ OUT)
DS-2 OUTPUT
M3D-Sub
M3D
LD-1A
DS-2 & Sub Crossover (IN)
ALL POLARITY SETTINGS FOR
LD-1A & LOUDSPEAKERS
REMAIN THE SAME
Figure 27. M3D and M3D-Sub headroom optimization using an LD-2 line driver
MID-HI OUTPUT (LOW CUT OUT, ARRAY EQ OUT)
MID-BASS OUTPUT
M3D-Sub
M3D
LD-2
MID-BASS & Sub
Crossover (IN)
ALL POLARITY SETTINGS FOR
LD-2 & LOUDSPEAKERS
REMAIN THE SAME
To Next Page
Loading...
