Meyer VANTAGE-VAC - Applications - Intended Use of Equipment; Receiving and Uncrating

5
3-1 RECEIVING YOUR VACUUM
Immediately check the condion of your new vacuum as received. The machine was shipped in perfect
condion and should arrive the same way. Ownership of the goods was transferred to the carrier as
soon as it le our dock. If there are any visible problems, mark them on the Bill Of Lading that the
carrier has and call his oce immediately, before the driver leaves your premises. Meyer cannot le a
claim on your behalf; however, please let us know by phone and wring about any problems so that we
can assist you with immediate replacement parts or informaon.
3-2 UNCRATING YOUR VACUUM
Carefully remove all of the packing materials and check the parts against the Packing List. Your vacuum
was test-run and shipped with all uids at the proper levels. Check them now and top o as required.
SECTION III
RECEIVING AND UNCRATING
SECTION II
APPLICATION - INTENDED USE OF EQUIPMENT
The Meyer line of vacuums is designed to safely and easily remove materials.
The following chart lists the uses for which the vacuum models were intended.
Vacuum Model Insulaon Removal Air Duct Cleaning
Vantage-Vac ® X
Versa-Vac
os
™ X
Veloci-Vac ® X X
Porta-Vac ® X
This equipment must be used only for the purpose for which it was intended. Any
other use could cause bodily injury to the operator, costly damage to the equipment
and void the warranty.