Meyra 1.610 - Maintenance And Service Manual

104 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

We move people.

Maintenance and Service manual

Electric wheelchair

Model 1.610 / 1.611 / 1.612 / 1.614 / 1.615

1.616 / 1.617

en

Table of Contents

Default Chapter2
- Table of Contents2
General7
- Foreword7
- Requirements Concerning Workshop Personnel7
- Customer Support7
- Information to Maintenance and Service Work8
  - Working on the Vehicle8
Vehicle Identification9
Term Definitions9
- Service Position9
  - Setting the Service Position10
    - Model 1.61011
Overview11
- Model 1.611 / 1.61411
- Model 1.61512
Safety Information13
- Storage13
Required Tools and Aids13
Adaptation and Adjustment Jobs14
Leg Support14
- Mechanical Leg Support14
- Electric Leg Support16
  - Adjusting the Depth of the Calf Pads16
  - Adjusting the Height of the Calf Pads16
- Leg Support Receptacle17
  - Adjusting the Leg Support Receptacle to the Thigh Length17
  - Adjusting the Height of the Leg Support Receptacle17
- Central Leg Support18
Arm Supports20
- Adjusting the Height of the Arm Supports20
- Depth Adjustment of the Arm Support Pad21
- Adjusting the Clothes Guard21
- Depth Adjustment of the Arm Support21
- Cable Fitting21
Lighted Clothes Guard Plates22
- Refitting the Lighted Clothes Guard Plates22
Back Support23
- Mounting the Push Bar23
- Mounting the Stabiliser Rod23
- Adjusting the Seat Depth23
- Secure Positions of the Back Support24
- Back Support Upholstery25
- Limit Switch25
  - Replacing the Limit Switch25
- Cable Fitting25
- Replacing the Push Bar25
Head Support26
- Height Adjustment and Removal of the Head Support26
- Adjusting the Position of the Head Support26
- Mounting the Head Support26
Seat Width27
- Adjusting the Seat Width over the Arm Supports27
- Adjusting the Seat Width through the Seat Frame28
Seat Depth30
- Adjusting the Seat Depth through the Position of the Back Support30
  - Position of the Back Support30
    - Model 1.610 / 1.611 / 1.61231
    - Model31
Seat Surface32
- Position of the Cross Brace Bracket for the Seat Plate and Seat Systems32
- Position of the Cross Brace Bracket for the Seat Strap32
Wheels33
- Wheel Change33
- Changing the Tyres34
  - Disassembly of the Tyres34
  - Assembly of the Tyres34
- Steering Wheels35
Support Castors35
- Replacing New Support Castors35
Fuses36
- Main Fuse36
  - Model 1.61736
- Electronic Security36
Lighting38
- Headlight / Front Turn Signal38
  - Adjusting the Headlights39
- Replacing the Lighting Fixture39
  - Replacing the Headlight / Front Turn Signal39
  - Replacing the Back Light41
Batteries43
- Model 1.610 / 1.611 / 1.614 / 1.615 / 1.61643
  - Removing the Battery Case43
  - Inserting the Battery Case43
- Model 1.61244
  - Removing the Battery Case44
  - Inserting the Battery Case44
- Model 1.61745
  - Removing the Batteries45
  - Positioning the Batteries45
Battery Charger46
Drive47
- Removing the Drive47
- Mounting the Drive50
- Carbon Brushes51
  - Removing the Carbon Brushes51
  - Mounting the Carbon Brushes51
Vehicle Suspension52
- Suspension of the Chassis52
  - Adjusting the Seat Suspension52
- Replacing the Spring53
  - Model 1.610 / 1.611 / 1.615 / 1.61453
  - Model 1.61253
USB Connector Socket54
Electronic Modules55
- Power Modules55
  - Programming the Driving Behaviour55
- Power Module, Replacing the Lighting, Resp. Lighting/Adjustment Module67
- Electronic Driving Stability Sensor (ESP)69
  - Replacing the Driving Stability Sensor69
- Electronic Driving Stability Sensor (ESP)70
  - Replacing the Driving Stability Sensor70
Electrical Adjustments71
- Adjusting the Angle of the Back Support71
  - Replacing the Adjustment for Angle Adjustment71
- Seat Inclination (Camber), Model 1.610 / 1.611 / 1.614 / 1.61572
- Seat Inclination (Camber), Model 1.61276
  - Replacing the Adjustment Motor for Seat Inclination76
- Seat Inclination (Camber), Model 1.61777
  - Replacing the Adjustment Motor for Seat Inclination77
- Seat Height, Model 1.61778
  - Replacing the Adjustment Motor for Seat Height78
- Lifting Rod, Model 1.61279
  - Removing the Lifting Rod79
  - Mounting the Lifting Rod80
- Seat Height, Model 1.61281
  - Adjustment of the Seat Height81
    - Lifting Rod with Electric Inclination81
    - Lifting Rod Without Electric Inclination84
  - Adjustment of Seat Inclination84
Mechanical Seat Inclination Adjustments85
- Seat Inclination (Camber), Model 1.610 / 1.611 / 1.614 / 1.61585
Error Indication89
- Error Indication R-Net89
  - LCD-Display89
- R-Net LED and VR290
Functional Checks94
- Checking the Cable Layout94
- Inspection During Standstill94
- Test Drive94
- Braking Distance94
Maintenance95
- Reinstallment95
- Maintenance Checklist of the Annual Maintenance Jobs96
  - DIN Norms and Guidelines98
  - Torque According to DIN for Screwed Connections98
Circuit Diagram99
- Electronic Type R-Net100
Notes101

Other manuals for Meyra 1.610

Operating Manual80 pages

Related product manuals

Preview: Meyra 1.610 MC1

Meyra 1.610 MC1

Meyra 1 612 iCHAIR MC3 27

Preview: Meyra 1.594

Preview: Meyra 1.155 NANO

Meyra 1.155 NANO

Meyra 1.158 NANO C

Preview: Meyra Ortopedia iTravel 1.054

Meyra Ortopedia iTravel 1.054

Preview: Meyra X1

Preview: Meyra Sprint

Preview: Meyra Optimus

Preview: Meyra Optimus 2

Meyra Optimus 2

Preview: Meyra Optimus 2 2.322

Meyra Optimus 2 2.322

Preview: Meyra SPRINT GT 2.593

Meyra SPRINT GT 2.593