Why does my MF Kitchen Appliance motor stop during operation?
The motor may stop during operation because the overload protection has been activated. To resolve this, switch the appliance off, unplug it, disassemble and clean it according to the cleaning instructions, and allow it to cool down for approximately 30 minutes.
What to do if the feeding screw is blocked repeatedly in my MF Kitchen Appliances?
If the feeding screw is blocked repeatedly, it's likely because food was pushed into the filler neck with too much pressure. To fix this, switch off the appliance, pull out the mains plug, remove the mincer attachment and the feeding screw, and clear the blockage. Then, reassemble the appliance according to the instructions and restart it.
What to do if ingredients are leaking out on the side of the threaded ring (6) of my MF Kitchen Appliances?
If ingredients are leaking out on the side of the threaded ring, it indicates that the threaded ring is not fitted correctly and is sitting too loosely on the mincer attachment. To resolve this, switch off the appliance and screw the threaded ring clockwise. Be careful not to overtighten it. If the problem persists, disassemble and clean the appliance according to the cleaning instructions.
What to do if food gets stuck in the feeding screw of my MF Kitchen Appliances?
If food gets stuck in the feeding screw, it's likely because food was pushed into the filler neck with too much pressure. Briefly press the reverse button to release the blockage and then continue with the mincing process.
Why does my MF Kitchen Appliance motor automatically switch to the reverse function?
The motor may automatically switch to the reverse function because it is overloaded. If this happens three times in a row, the motor will stop, and the cleaning symbol will light up. In this case, disconnect the power plug from the socket, then disassemble and clean the appliance according to the cleaning instructions.
Why is there rapid wear of the cross blade and the grates in my MF Kitchen Appliances?
Rapid wear of the cross blade and grates is caused by the threaded ring being tightened too much and/or operating the mincer in empty mode. The threaded ring must never be tightened, and the mincer must never be operated without meat in the appliance. After drying, lightly oil the grates, the roll blade, the cross blade, and the feeding screw with vegetable oil.
How to fix feeding screw wobble during operation of my MF Kitchen Appliances?
If the feeding screw wobbles during operation, it is likely that the threaded ring has come loose. To fix this, switch off the appliance and screw the threaded ring clockwise. Be cautious not to overturn or overtighten the threaded ring!
What to do if the meat mass is not fine enough using my MF Kitchen Appliances?
If the meat mass is not fine enough, the grate may be too big, or the ingredients have not been minced a sufficient number of times. Use a finer grate and/or mince the meat mass several times in a row.
Detailed listing of all parts of the meat mincer, including casing, attachments, and blades.
Identification and brief description of various optional accessories for sausages, pies, and shortbread.
Explanation of symbols displayed on the appliance, indicating speed settings and functions.
Provides technical details such as voltage, power consumption, and protection class.
Instructions to be followed before operating the appliance for the first time.
Safety guidelines regarding children, supervision, and users with reduced capabilities.
Important warnings on proper usage, food types, and potential hazards to avoid injury.
Details on how to operate the main control knob for starting, stopping, and reverse functions.
Guide to using the display for selecting different speed settings and understanding operational symbols.
Instructions on selecting and using the different grates for varying food consistencies.
Step-by-step instructions for assembling the main mincer unit and its components.
Guide on how to attach and use the sausage filling attachments.
Instructions for assembling and using the kibbeh attachment for dough tubes.
Steps for attaching and using the shortbread biscuit making attachment.
Detailed procedure for mincing and mixing meat and other food items.
Guidance on preparing sausage mixture and filling casings using the mincer.
Instructions for preparing meat pies or kibbeh using the dedicated attachment.
How to prepare and shape shortbread biscuits using the appliance.
Instructions on how to safely dismantle the meat mincer after use.
Guidelines and methods for cleaning the appliance and its parts after use.
A guide to diagnosing and resolving common problems encountered during appliance operation.
Safety precautions related to the mains plug, earthing, and fuse requirements for UK users.
Information on product compliance with EU directives and environmentally sound disposal methods.
To Next Page
General