MFJ-936C Deluxe High-Efficiency Magnetic Loop Tuner Instruction & Technical Manual
Step 7 You can now enjoy operating in your favorite mode. However, if you change frequency
more than about 5 kHz, you may find you will need to re-adjust the TUNING controls for
minimum SWR. Rotate the TUNING control clockwise for higher frequencies and counter
clockwise for lower frequencies. Even greater frequency excursions can cause the MATCHING
control to also require adjustment. This concludes the MFJ–936C High-Efficiency Magnetic Loop
Tuner™ operating instructions.
5.3 MFJ-936C ACCESSORIES
Two kits are available for use with the MFJ-936C High-Efficiency Magnetic Loop Tuner/Antenna
Current Meter™, and each gives the operator expanded operational capabilities and use of
pre-made/fabricated wires and equipment. These kits are:
• The MFJ-57B, which contains a PVC Cross device for mounting a precut and lugged wire
loop to the top cover of the tuner. This flexible 10-gauge wire loop covers 20 and 30 meters,
and the ends have low-resistance lugs.
• The MFJ-58B, which contains all of the MFJ-57 items, plus 40-meter, 15-20 meter, and
10-17 meter wire loops, with clips to hang loops as needed.
6 TECHNICAL ASSISTANCE
If you have any problem with this unit first check the appropriate section of this manual. If the
manual does not reference your problem or reading the manual does not solve your problem, you
may call MFJ Technical Service at (662) 323-0549 or the MFJ Factory at (662) 323-5869. You will
be best helped if you have your unit, manual and all information on your station handy so you can
answer any questions the technicians may ask.
You can also send questions by mail to MFJ Enterprises, Inc., 300 Industrial Park Road,
Starkville, MS 39759; by Facsimile (FAX) to 662-323-6551; or by email to
techinfo@mfjenterprises.com. Send a thorough description of your problem, an explanation of
exactly how you are using your unit, and a complete description of your station.
-14-
To Next Page
Loading...
