Need help?Do you have a question about the MGE UPS Systems Galaxy PW 120 kVA and is the answer not in the manual?
Overview of Galaxy PW UPS system capabilities and specifications.
Details the physical design and features of the main UPS cubicles.
Specifies electrical data crucial for choosing upstream protective circuit breakers.
Lists recommended circuit breakers for upstream protection of the UPS.
Provides current values and cable cross-sections for proper wiring.
Guides on moving, placing, and arranging cubicles, considering floors and ventilation.
Presents single-wire diagrams for connecting power circuits in various UPS configurations.
Details power connection methods and cable entry points for UPS cubicles.
Explains connection procedures and important safety notes for battery cubicles.
Describes the connections and layout for external bypass cubicles.
Details connecting auxiliary circuits like Media Contacts 11 and emergency power off.
Guides on inter-cubicle connections for parallel UPS setups.
Covers the final tasks to complete the UPS installation and secure components.
General| Power Rating/Capacity/Rated Power | 120 kVA |
|---|---|
| Input Voltage | 400 V |
| Output Voltage | 400 V |
| Frequency | 50/60 Hz |
| Topology | Double Conversion Online |
| Efficiency | Up to 94% |
| Battery Type | Sealed Lead-Acid (VRLA) |
| Dimensions (HxWxD) | 2000 x 600 x 800 mm |
| Communication Interface | RS-232, USB, SNMP |
| Operating Temperature | 0 to 40 °C |
To Next Page