Need help?Do you have a question about the MGE UPS Systems GALAXY 6000 and is the answer not in the manual?
General| Frequency | 50/60 Hz |
|---|---|
| Topology | Double Conversion Online |
| Efficiency | Up to 94% |
| Humidity | 0-95% non-condensing |
| Input Voltage | 380/400/415 V |
| Output Voltage | 380/400/415 V |
| Battery Type | Sealed Lead Acid (SLA) |
| Typical Recharge Time | 4 to 8 hours |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -15°C to 45°C |
| Dimensions (H x W x D) | Varies by model |
| Weight | Varies by model |
| Communication Interface | RS-232, SNMP, USB |
Explains how the UPS operates with a normal AC source available.
Details UPS operation when the AC source fails or is out of tolerance.
Explains how multiple UPS units operate in parallel, with or without redundancy.
Details the automatic transfer of the load to the bypass AC source.
Defines the required load capacity and number/rating of UPS units.
Specifies the required battery backup time and service life for the UPS.
Details the required characteristics of the normal AC power source supplying the UPS.
Specifies the required characteristics for the bypass AC power source.
Details the type, service life, and sizing requirements for the UPS batteries.
Specifies the output voltage, frequency, and transient response of the inverter.
Details the process and conditions for transferring the load to the static bypass.
Covers protection against deep discharge, independent regulation, and temperature compensation.
Guarantees the availability of certified original replacement parts for ten years.
To Next Page