To Next PageTo Next PageWhat to do if my MGE UPS Systems UPS shows 'OVERLOAD ALARM REDUCE LOAD'?
If the LED is on and the LCD of your MGE UPS Systems UPS indicates 'OVERLOAD ALARM REDUCE LOAD', it means the load level exceeds the programmed overload level or the UPS capacity. You should reduce the load by disconnecting some devices.
What to do if MGE UPS Systems UPS displays 'OVERLOAD FAULT REDUCE LOAD'?
If the LED is on and the LCD of your MGE UPS Systems UPS displays 'OVERLOAD FAULT REDUCE LOAD', it means the UPS shut down automatically because of an overload at the UPS output. You should check the power drawn by the connected devices and disconnect any non-priority devices.
General| Output Power Capacity | 2700 W |
|---|---|
| Input Voltage | 230 V |
| Output Voltage | 230 V |
| Output Frequency | 50/60 Hz |
| Waveform | Sinewave |
| Rack Size | 3U |
| Rated Capacity | 3000VA |
| Form Factor | Rack-mountable |
| Battery Type | Maintenance-free sealed lead acid battery |
| Battery Runtime | Varies by load |
| Dimensions (H x W x D) | 133 x 482 x 610 mm |
| Communication Ports | USB |
| Product Type | UPS |
Covers potential hazards to personnel during UPS handling and operation.
Details safety measures related to the UPS unit itself and its installation.
Outlines specific procedures and considerations for safe operation and storage.
Steps for powering on the UPS and its basic operational status.
Explains how the UPS functions when running on internal batteries.
Procedures for safely turning off the UPS and connected equipment.
Guidance on identifying and resolving common UPS issues and error messages.
Step-by-step instructions for safely replacing the UPS battery modules.
Detailed technical data and parameters for the Pulsar M product range.
