Need help?Do you have a question about the MGE UPS Systems Pulsar EX10 and is the answer not in the manual?
Contact MGE UPS SYSTEMS Customer Support Services for operation, repair, or servicing inquiries.
Details the proprietary nature of the manual's information and MGE UPS SYSTEMS' intellectual property rights.
Details MGE's two-year warranty for Pulsar equipment against defects in materials and workmanship.
Essential safety guidelines for operating and maintaining the UPS, covering electrical, environmental, and battery handling.
Details the suitability of Pulsar UPSs for protecting sensitive network servers and interconnection devices from electrical disturbances.
Highlights features like automatic battery testing, LED indicators, bar graph display, eco-friendliness, and software integration.
Kit for installing Pulsar EX7/EX10/EX15 units in a 19-inch rack, supporting multiple units or battery extensions.
Unit for measuring room temperature and humidity with relay contacts for administration platform signals.
Modules to lengthen the battery time of Pulsar EX10/EX15 units.
Cables for file-closing utilities offered by network operating systems.
Software for automatic file closing, remote UPS shutdown, and interrogation of operating parameters.
MGE UPS SYSTEMS' offering for administering groups of UPSs using the SNMP protocol.
Card to make the UPS SNMP-compatible.
Option providing 5 voltage-free contacts for status reporting (on battery, low battery, etc.).
Software for communication with the UPS from a Windows workstation, enabling personalization and monitoring.
Network software for protecting networks and multi-station systems, offering supervision, control, and safety functions.
Guidance on observing safety rules and selecting an appropriate location for the UPS unit.
Checks to perform before powering on the UPS, including button status and rating label verification.
Instructions for connecting the AC input cord to supply power and connecting computer loads to output sockets.
Procedure for connecting an optional battery extension module to the Pulsar EX10/EX15.
Describes the U-Talk communication port (RS232) used for MGE UPS SYSTEMS proprietary protocol.
Details the status information card, its pinouts, and the signals it transmits via a SUB-D 9-pin connector.
Details the SNMP card that enables SNMP protocol communication for network management.
Step-by-step guide for starting the Pulsar UPS when utility power is available, including indicator tests.
Procedure for starting the Pulsar UPS when no utility power is present, detailing battery operation indicators.
Details on operating the UPS on battery power, including low battery warnings, automatic shutdown, and load management.
Explains overload conditions, automatic load transfer to bypass, and troubleshooting steps for overload faults.
Covers device faults, battery faults, and low battery conditions, including indicator lights and recommended actions.
Describes the operation on bypass mode, which provides temporary inverter fault tolerance.
General| Brand | MGE UPS Systems |
|---|---|
| Model | Pulsar EX10 |
| Category | UPS |
| Language | English |
To Next Page