Need help?Do you have a question about the MGE UPS Systems EPS 8000 and is the answer not in the manual?
General| Humidity | 0-95% non-condensing |
|---|---|
| Output Frequency | 50/60 Hz |
| Waveform Type | Sine wave |
| Battery Type | Valve Regulated Lead Acid (VRLA) |
| Communication Ports | RS-232 |
| Audible Alarm | Yes |
| Form Factor | Tower |
| Operating Temperature | 0-40°C |
| Storage Temperature | -15°C to 45°C (5°F to 113°F) |
Provides User instructions for operating the EPS 8000 UPS Single Module system.
Provides an overview of the EPS 8000 UPS, its features, and safety certifications.
Covers technical specifications, circuit breaker functions, and power flow diagrams.
Details indicators and controls located on the UPS module's front and hidden panels.
Describes procedures for normal operation of EPS 8000 Single Module systems.
Explains the alphanumeric interactive status screen display and its default configuration.
Guides users on configuring display language and LCD screen contrast.
Details how to interpret and respond to alarm messages displayed on the UPS.
Details the step-by-step procedure for starting the EPS 8000 UPS.
Describes shutdown procedures for normal, emergency, overload, and maintenance.
Covers maintenance, safety, preventive care, parts, and troubleshooting for the EPS 8000.
Provides critical safety warnings and precautions when working with the UPS and batteries.
Details essential safety guidelines and precautions for battery maintenance and replacement.
Outlines minimum preventive maintenance routines for optimal UPS performance.
To Next Page