Need help?Do you have a question about the MGE UPS Systems 11+ and is the answer not in the manual?
General| Output Voltage | 230 V |
|---|---|
| Form Factor | Tower |
| Communication Ports | USB |
| Product Type | UPS |
| Topology | Line-Interactive |
| Frequency Range | 50/60 Hz |
| Battery Type | Sealed Lead-Acid (SLA) |
| Typical Backup Time at Full Load | 5 minutes |
| Typical Backup Time at Half Load | 15 minutes |
Highlights risks of electric shock and necessary safety measures during operation and maintenance.
Details how to connect the UPS to power sources and computer systems.
Covers the steps for starting up the UPS with and without utility power.
Explains normal UPS behavior with and without utility power, including voltage regulation.
Details UPS operation during power failures and battery autonomy status.
Describes how the UPS responds to overload conditions and device faults.
To Next Page