MGE UPS Systems 11+ - Technical Specifications

MGE UPS SYSTEMS
Pulsar ESV 8+/11+/14+/22+ EB 22/EB 22XLA : 86-153277-00
20
technical data
■ output power:
■■ Pulsar ESV 8+: 780VA/490W ■■ Pulsar ESV 14+: 1400VA/980W
■■ Pulsar ESV 11+: 1080VA/700W ■■ Pulsar ESV 22+: 2200VA/1540W
■ utility power source:
■■ voltage (V): 92V to 138V single phase (*)
■■ frequency (F): 47Hz to 53Hz or 57Hz to 63Hz
■ battery: Pulsar ESV 8+: 2 x 12V - 7.2Ah
■■ type: Pulsar ESV 11+: 3 x 12V - 7.2Ah
Pulsar ESV 14+: 4 x 12V - 7.2Ah
Pulsar ESV 22+: 8 x 6V - 12Ah
maintenance free sealed lead-acid
caution: battery life (4 or 5 years) is halved every 10°C above 25°C
■ output specifications with load on battery:
■■ voltage (V): single phase 120V ±5% (**)
■■ frequency (F): 60Hz ± .1Hz
■ output specifications with load on utility power:
■■ voltage (V): see "normal operation with utility power present"
■■ frequency (F): 47Hz to 53Hz or 57Hz to 63Hz
■ environment:
■■ noise level: ≤ 40dBA for operation on utility power
≤ 45dBA for battery backup time
■■ operating temperature: 0 to 35°C
■■ relative humidity: 0 to 90%
non condensing
■ dimensions and weights: Pulsar ESV 8+ Pulsar ESV 11+ / 14+ / 22+ / EB 22 / EB 22XLA
■■ height H (mm/inch): 178/7 248/9.8
■■ width W (mm/inch): 140/5.5 172/6.8
■■ depth D (mm/inch): 380/15 457/18
■■ weight (kg/lb) : 13.5/30 21/23/16/20/35 (kg) 46/51/35/44/77 (lbs)
(*): adjustable high and low thresholds using ESV Driver (CD-ROM: EMB/ESVPLUS/CONFIG)
(**): can be adjusted from 100 to 127V using ESV Driver (CD-ROM: EMB/ESVPLUS/CONFIG)