EasyManua.ls Logo

MGE UPS Systems 11+ - Battery Backup and Autonomy

MGE UPS Systems 11+
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MGE UPS SYSTEMS
Pulsar ESV 8+/11+/14+/22+ EB 22/EB 22XLA : 86-153277-00
17
operation with battery back up time
no utility power
return of utility power
1a to 1d indicating the battery
recharge percentage:
shown, between 0 and 25%
1g on
silence
load charge percentage
your load is supplied by the utility power
1c to 1f indicating the load
charge percentage:
shown, between 25 and
50%
1g on
silence
If utility power present, press button 2 :
At whatever point the utility power
returns, Pulsar switches to normal
operation:
flashing
x + ε min
x min 5 min0 min
flashing
to
if Pulsar is operating off
load: device switches off (*)
Pulsar switches off
automatically
low battery warning
indicating the
remaining autonomy
time: here, between
75 and 50%
to
silence
1a
1e
1a
1g
1a
1g
silence
1g
1c
1f
1g
1f on
your load is no longer
powered
(*)
configuration via ESV Driver
1 beep every 10 s
your load is powered
by the battery
to off
discontinue use of load,
battery is near exhaustion
your load is no longer
powered
to off off
1 beep every 3 s
power failure
Note:
Button 2 is to disable or activate the
audible alarm device when operating on
battery.

Related product manuals