To Next PageTo Next Page
Need help?Do you have a question about the Mi-Light FUT089 and is the answer not in the manual?
Control colors via the color ring and adjust saturation or color temperature.
Slide the brightness slider to control light intensity.
Press the 'W' button to activate white light mode.
Use ON/OFF buttons to control linked devices.
Cycle through dynamic lighting modes using the 'M' button.
Adjust dynamic mode speed using 'S-' and 'S+' buttons.
Add endless lights to zones for flexible group combinations.
Visual examples illustrating different group combinations.
Step-by-step guide to link lights with the remote controller.
Step-by-step guide to unlink lights from the remote controller.
The 8-zone remote only controls specified Mi-Light products.
Advice on battery quality, handling the touch ring, and sensitivity.
Guidelines for using the remote in various environmental conditions.
This document describes the Mi-Light FUT089 8-Zone RGB+CCT Remote Controller, a device designed to control specified Mi-Light smart lighting products.
The FUT089 remote controller operates on the globally recognized 2.4GHz frequency band, employing the GFSK (Gaussian Frequency Shift Keying) modulation method. This technology ensures several key advantages, including low power consumption, extended transmission range, robust anti-interference capabilities, and a rapid communication rate. The primary function of this remote is to provide comprehensive control over compatible Mi-Light smart lights, allowing users to adjust various lighting parameters. These parameters include color, color temperature, saturation, and brightness. The remote is equipped with an 8-zone control system, enabling users to manage multiple lighting groups independently. This flexibility allows for the creation of diverse lighting environments and scenarios, catering to different moods and activities.
The remote features a color ring, which is the primary interface for selecting and changing colors. By touching different points on the color ring, users can instantly alter the light's hue. In addition to color selection, the remote offers precise control over color temperature when the lights are set to white light mode. This allows users to shift between warmer and cooler white tones, from a cozy, inviting glow to a crisp, energizing light. When in color light mode, the same control mechanism is used to adjust color saturation, enabling users to make colors more vibrant or more subdued. A dedicated brightness slider is integrated into the remote, providing an intuitive way to adjust the light's intensity. Sliding the control up or down will increase or decrease the brightness, respectively.
For quick access to white light, a "W" button is provided. Pressing this button will switch the linked devices to white light mode. The remote also includes "ON" and "OFF" buttons to power linked devices on and off. Dynamic lighting effects can be engaged and controlled using the "M" button, which cycles through various dynamic modes. To fine-tune these dynamic effects, "S-" and "S+" buttons are available to decrease or increase the speed of the dynamic modes, respectively. The 8-zone control system is represented by numbered buttons (1-8), allowing users to select and control individual zones or groups of lights. Each zone can be independently linked or unlinked to specific lights, offering extensive customization possibilities for grouping.
The Mi-Light FUT089 remote controller is designed for intuitive and flexible use, allowing users to create complex lighting setups with ease. The 8-zone grouping capability is a standout feature, enabling users to add an unlimited number of lights to any of the eight zones. This means that lights can be grouped and controlled in various combinations, providing complete flexibility in designing lighting schemes for different areas or occasions. For instance, lights in a living room could be assigned to Zone 1, while kitchen lights are assigned to Zone 2, and so on. This allows for independent control of each area, or simultaneous control if desired.
Linking and unlinking lights to the remote is a straightforward process. To link a light, the user must first switch off the light, wait for 10 seconds, and then switch it back on. Within 3 seconds of the light turning on, the user needs to short press the "I" (Zone ON) button for the desired zone three times. A successful linking is indicated by the light blinking three times slowly. If the light does not blink slowly, it signifies a failed linking attempt, and the user should repeat the process. Unlinking a light follows a similar procedure: switch off the light, wait 10 seconds, switch it back on, and then short press the "I" (Zone ON) button for the corresponding zone five times within 3 seconds. A successful unlinking is confirmed by the light blinking ten times quickly. It is crucial that the unlinking process is performed for the same zone that the light was originally linked to.
The remote is powered by two AAA batteries. An indicator light on the remote provides feedback during operation, and if it starts blinking quickly, it signals that the batteries need to be replaced. This ensures that users are aware of low battery levels and can replace them in a timely manner to maintain uninterrupted control. The design emphasizes ease of use, with clearly labeled buttons and an intuitive touch-sensitive color ring and brightness slider. The ability to control color, color temperature, saturation, and brightness across multiple zones makes it a versatile tool for managing smart lighting environments.
Maintaining the Mi-Light FUT089 remote controller primarily involves proper battery management and careful handling to ensure its longevity and optimal performance. The remote is powered by two AAA batteries, and it is crucial to use good quality batteries. The manual explicitly warns against using poor quality batteries, as they can leak and damage the remote controller. When the indicator lamp on the remote blinks quickly, it is a clear sign that the batteries are low and need to be replaced promptly. This proactive approach to battery replacement helps prevent potential damage from battery leakage and ensures continuous functionality.
When installing the batteries, users are advised to keep their finger off the touch ring. This recommendation is made to improve the sensitivity of the touch ring. After installing the batteries, it is suggested to wait for 3 seconds before using the remote to allow it to initialize properly. If the touch ring is found to have low sensitivity, reinstalling the batteries is recommended as a troubleshooting step.
The remote control system is described as a precise electronic product, and as such, it requires careful handling and storage. Users should avoid using the remote in environments that are humid, high temperature, dusty, or subject to high voltage. Instead, it should be stored and used indoors, in a dry environment free from static electricity. These precautions help protect the internal electronic components from damage and ensure reliable operation.
Furthermore, the manual advises against using the remote controller in areas with wide-range metal obstructions or strong electromagnetic waves. Such environments can significantly affect the controlling distance and potentially interfere with the 2.4GHz signal, leading to unreliable performance. Adhering to these environmental guidelines will help maintain the remote's effective control range and prevent communication issues with the linked smart lights. The remote is designed to be robust for its intended use, but like all electronic devices, it benefits from careful handling and adherence to the recommended operating conditions.
General| Brand | Mi-Light |
|---|---|
| Model | FUT089 |
| Category | Remote Control |
| Frequency | 2.4 GHz |
| Power Source | Battery |
| Material | Plastic |
| Type | Wireless Remote |
| Compatibility | Mi-Light LED bulbs and strips |
| Control Distance | 30m |
