Mi-Light FUT092 User Manual

Master ON
Color Ring
Speed+
Speed-
Saturation
Control
Master OFF
Indicator
Color
temperatureLine
Brightness
Dimming
Mode
Zone ON
(Link/Unlink)
Zone OFF
Made in China
User Instruction
4-Zone RGB+CCT Remote Controller ( FUT092 )
2.4G
Parameters
Instruction
Model No.: FUT092
Voltage: 3V(2*AAA battery)
Power Consumption: 6dBm
Standby Power Consumption: 20uA
Transmission Frequency: 2.4GHz
Modulation Method: GFSK
Control Distance: 30m
Size: 138mm*56mm*20mm
Features
This product adopt world-wide used 2.4GHz frequency, GFSK control method,
with the features of low power consumption, long distance transmitting, strong
anti-interference and fast comunication rate; can control specified Mi-Light
smart light with color, color temperature, saturation and brightness changing.
Caution
1. Remote controller only control specified
Mi-Light
products; not all Mi-Light series
can work on this remote
controller.
2.
In the using of the remote, if the indicated
lamp
blinking quickly, pls change the
battery in time.
Pls don’t use poor quality battery to
avoid the leaking
of battery liquid to
damage the remote controller.
3.
Pls don’t use the remote controller on
the
wide-range metal or strong
electromagnetic wave area, otherwise,
it
will badly affect the controlling
distance.
1. Long press “Master OFF” or “Zone OFF” to night light mode.
2. Touch “Color temperature line” to white light mode and adjust color temperature.
3. Touch “Color Ring” to change the colors.
4. Press “Speed+” to accelerate the dynamic mode speed continously until to fastest
speed.
5. Press “Speed-” to lower the dynamic mode speed continously until to lowest speed.

Mi-Light FUT092 Specifications

General

Brand	Mi-Light
Model	FUT092
Category	Controller
Language	English

Summary

Product Features and Specifications

Product Features

Describes the 2.4GHz GFSK remote controller with low power, long distance, and anti-interference.

Technical Parameters

Lists model, voltage, power consumption, transmission frequency, control distance, and size.

Remote Controller Operation

Night Light Mode

Activate night light mode by long pressing 'Master OFF' or 'Zone OFF'.

White Light and Color Temperature

Switch to white light and adjust color temperature via the color temperature line.

Color Selection

Change colors by touching the Color Ring on the remote controller.

Dynamic Mode Speed Control

Adjust dynamic mode speed by pressing 'Speed+' to increase or 'Speed-' to decrease.

Important Cautions and Warnings

Product Compatibility

Controller is compatible only with specified Mi-Light products, not all series.

Battery Replacement and Quality

Replace battery when indicator blinks quickly; avoid poor quality batteries to prevent damage.

Environmental Interference

Avoid using the remote near wide-range metal or strong electromagnetic waves.

Device Linking and Unlinking

Linking Instructions

Steps to link the light with the remote controller, indicated by a slow blink.

Unlinking Instructions

Steps to unlink the light from the remote controller, indicated by a quick blink.