6
Switch between single and dual earbud:
When both earbuds are connected successfully,
they are in dual-earbud mode. Place one of the
earbuds back into the charging case and close
its lid, the other earbud will automatically enter
the single-earbud mode. Remove the earbud
from the charging case, the dual-earbud mode
will automatically be restored again.
Connection
Automatic Connection:
1. Remove both earbuds from the charging case
simultaneously, and wait 2–3 seconds for the
earbuds to automatically connect with each
other. Make sure the Bluetooth is enabled on
your device. When the indicator of the left or
right earbud slowly blinks white, search for
"Mi True Wireless EBs Basic S" on your device.
2. Once your device and earbuds are successfully
connected, your earbuds will automatically
connect to the previously paired device (the
Bluetooth is enabled) when they are turned on.
Note: If you cannot pair the earbuds, place them
back in the case and repeat the previous steps.
To Next Page
Loading...
