Mi DDHBC02NEB - Daily Care and Maintenance

This version is for private use only and should not be distributed.
9. Daily Care and Maintenance
Cleaning and Storage
If you see stains on the scooter's body, wipe them off with a damp cloth. If the stains won't scrub off,
put on some toothpaste, and brush them with a toothbrush, then wipe them off with a damp cloth. If
you see scratches on plastic parts, use sandpaper or other abrasive materials to polish them.
Notes: do not clean the scooter with alcohol, gasoline, kerosene or other corrosive and volatile
chemical solvents to prevent dire damage. Do not wash the scooter with a high-pressure water spray.
During cleaning, make sure that the scooter's turned off, the charging cable is unplugged, and the
rubber flap is closed as water leakage may result in electric shock or other major problems.
When the scooter's not in use, keep it indoors where it is dry and cool. Do not put it outdoors for long
time. Excessive sunlight, overheating and overcooling accelerate tire aging and compromise the
scooter and the baery pack's lifespan.
Tire Maintenance
Regularly check the tire pressure (at least every 2-3 months), the recommended tire pressure is 50 psi.
Riding with an incorrect tire pressure reduces tire life and safety.
Baery Maintenance
1. Do not use baery packs of other models or brands, as there may be a safety risk.
2. Do not disassemble, squeeze or puncture the product. Do not touch its baery contacts. Do not
disassemble or poke the outer casing. Do not place the product into water, fire nor expose it to
temperatures above 50°C (including heat sources such as stoves, heatings, etc.). Avoid metal objects
from touching the baery contacts, since this may result into short circuits, physical injury or even
death.
3. Any water geing into the baery may cause damage to the internal circuit, risk of fire or even
explode. If there is any suspicion of water geing into the baery, immediately stop using the baery
and return it to the Aer Sales service for inspection.
4. Only use the original charging adapter to avoid potential damage or fire.
5. Improper disposal of used baeries can seriously pollute the environment. Observe local regulations
when disposing of this baery pack. Do not discard this baery pack at will, to protect the natural
environment.
6. Fully charge aer every use, in order to extend its baery life.
Do not place the baery in an environment where the ambient temperature is higher than 50°C or
lower than -20°C (e.g., do not leave the scooter or the baery pack in a car under direct sunlight for an
extended time). Do not throw the baery pack into fire as it may lead to baery failure, baery
overheating, and even another fire. If the scooter is expected to be le idle for more than 30 days,
please fully charge the baery and place it in a dry and cool place. Keep in mind to recharge it every
60 days to protect the baery from potential damage which is beyond limited warranty.
Always charge before exhausting the baery to prolong the baery's lifespan. The baery pack
performs beer at normal temperature, and poor when it is below 0°C. For instance, when it is below
-20°C, the riding range is only half or less at normal state. When the temperature rises, the riding range
restores. For detailed information, please refer to Mi Home App.
Note: fully charged Mi Electric Scooter Pro will last for 120-180 days. The built-in intelligent chip will
keep a log of its charging and discharging records. The damage caused by prolonged no charge is
irreversible and is beyond limited warranty. Once the damage is done, the baery cannot be recharged
(non-professionals are forbidden to dismantle the baery pack, as it may cause electric shock, short
circuit or even major safety accidents).
13