How to Use
1. Use the clamp to secure the Mi 20W Wireless Car Charger onto the air vent and tighten the knob on the back.
Plug in the supplied charger into the car’s cigarette lighter or power port, and insert the USB-A interface into the
charger’s red USB port. Then plug in the USB-C interface into the car charger. When the indicator blinks blue
three times, and the welcome light remains lit up, the wireless car charger is functioning normally.
Note: Please properly
tighten the knob before use to prevent accidental movement during use.
2. Make sure there are no metal objects on the surface of the wireless car charger, nor on the back of the
compatible phone which meet the Qi standard. Move the phone close to the inductive sensor, and the wireless
car charger’s arms will open automatically then close automatically to clamp down the phone. The indicator light
will be blue while charging normally.
To Next Page
Loading...