Note: The surface for mounting the wireless car charger needs to be clean and flat. Make sure press and hold it
firmly for 5 to 10 seconds after mounting. Due to the strength of the adhesive, forced removal may damage the car’s
interior. It is recommended to have a professional to remove the adhesive mount.
Precaution
Do not strike or crush to this product.
Keep the glass surface of the inductive sensor clean.
Do not disassemble or modify the product.
Do not place the product near or in fire, nor submerge it in water.
Do not use this product in severely hot, humid, or corrosive environments so as to avoid damage to its electrical
circuit.
Do not place any cards including ID card and bank card with a magnetic strip/chip near
or onto the wireless car charger to avoid corrupting the card. Keep a distance of at least 20 cm between
implanted medical devices (pacemakers, cochlear implants, etc.) and the product so as to avoid potential
interference to the
medical devices.
Do not allow children to touch or play with this product to avoid unnecessary accidents.
Please unplug the car charger from the car’s cigarette lighter or power port when it will not be used for a long
time. For your user experience, it is not recommended to reuse the adhesive mount as the strength of the
adhesive will be decreased.
The operating frequency for wireless charging is 110148 KHz. The equipment should be installed at least 20 cm
(7.9 in.) from your body or nearby persons.
CE
Hereby, Zimi Corporation declares that the radio equipment type Mi 20W Wireless Car Charger is in compliance with
Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
http://www.mi.com/global/service/support/declaration.html
WEEE
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU)
which should not be mixed with unsorted household waste. Instead, you should protect human health and the
environment by handing over your waste equipment to a designated collection point for the recycling of waste
electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling
will help prevent potential negative consequences to the environment and human health. Please contact the installer
or local authorities for more information about the location as well as terms and conditions of such collection points.
Specifications
Product Name: Mi 20W Wireless Car Charger
Model: WCJ02ZM
Input: 5 V=3 A 9 V=2 A 12 V=2 A 15 V=1.8 A 20 V=1.35 A
Output: 20 W Max.*
To Next Page
Loading...