SETIndicator light
INPUT
V+RGBCW
V+RGBW
V+RGB
V+CWCW
OUTPUT
WWWW
WW
V+WWWWW
Scan to install APP
Support amazon alexa and
google assistant control
2.4GHz
Subordinate New Brand
Made in China
Model No.: WL5
Input Voltage: DC12V~24V ( 5.5*2.1mm)
Output: 6A/Channel (Total output Max.15A)
Working Temperature: -20~60°C
Communication Mode: WiFi-IEEE 802.11b/g/n 2.4GHz
RF: 2.4GHz
WiFi 5 in 1 LED Strip Controller
Model No.: WL5
WiFi 5 in 1 LED Strip Controller
The controller is adopted by the most advanced PWM control
technology, and has memory function(The light status will keep
same as the status before you turn off the light); Wireless and
4G controlled by MiBoxer APP.
1. Features
2. Parameters
WiFi
Wireless Control
WiFi
Dimmable
Saturation control
Group control
randomly by APP
Smartphone
APP control
RGB colors to
choose
Support amazon alexa and
google assistant control
Timing ON/OFF
the lights
Compatible with 2.4GHz
RF Remote Controller
Please read the instructions carefully
before using the controller.
Model No.: WL5
Input Voltage: DC12V~24V ( 5.5*2.1mm)
Output: 6A/Channel ( Total Output Max.15A )
Working Temperature: -20~60℃
Communication Mode: WiFi-IEEE 802.11b/g/n 2.4GHz
RF: 2.4GHz Weight: 65g
124mm
38mm
23mm
Input 1
Input 2
Color temperature
2700~6500K
3. Auto-synchronization function
Controller
Controller
Controller Controller
Different controllers can work synchronously when they are
started at different times, controlled by the same remote, under
same dynamic mode and with same speed.
1. Indicating Auto-transmitting.
2. Controller will be auto-synchronizing in the same
dynamic modes and within 30m controlling distance.
Remark:
16 Color Changing
modes
SET Button: Long press “SET” for 3 seconds; When red indicating
light blink quickly, device reset and go into Smart Link mode.
Single Color
Mode
Dual White
Mode
RGB
Mode
RGBW
Mode
Switching Output Mode: Short press "SET" button to switch the
output mode; The indicating lamp flickering means switching
successfully; Different colors flickering correspond to different
output mode; Details see below sheet.
RGB+CCT
Mode
Red light
always-on
Disconnected
from network
Indicating light instruction:
Smart Link
mode
Networking
successfully
Received
signal
Device
malfunction
Red light
blinking
Green light
always-on
Green light
blinking
Yellow light
blinking
White Light
Flickering
Yellow Light
Flickering
Red Light
Flickering
Green Light
Flickering
Blue Light
Flickering
0304-1
Subordinate New Brand
To Next Page
Need help?
General
