Copyright © 2009-2011 Micca, Ltd. All rights reserved.
V. IR Remote Control
The Micca MPLAY is equipped with an IR remote control. While the player’s
built-in buttons can be used to navigate and select files for playback, the remote
control is designed to provide more comprehensive access to all of the player’s
features and functions.
Buttons on the remote control are laid out in a logical and familiar manner. The
specific function of each button will be described in the relevant sections in which
they are used.
The remote control requires a CR2025 3V Lithium battery for operation. To
install battery, slide open the battery compartment cover on the back of the
remote. Ensure that the battery is inserted in the correct polarity as indicated in
the battery compartment.
When not planning to use the remote for a long period, remove the battery from
the remote to prevent damage from potential battery leakage.
Do not use batteries of different types as this may lead to
damage to the batteries and remote, and injury to the user.
The remote is most effective when used within 20ft of the Micca MPLAY player,
and within a 60-degree angle with respect to the IR remote sensor on the player.
Strong ambient lighting may degrade the effective range and angle of the remote.
Batteries typically last for 1 year with normal use. If the batteries become too
weak, the remote’s effective range will be decreased dramatically and its
operation may become intermittent. When this happens, replace the batteries.