10
lap (up to 100 laps).
3. Press D to display current set; press D again to switch to the next set.
4. Press and hold D 3 seconds to delete all stored data in the current set displayed.
Alarm Mode
1. Press B to change to Alarm Mode.
2. Press C to toggle alarm on/off.
3. Press D to switch between alarm 1/alarm 2.
4. In Alarm Mode, press and hold A 3 seconds to enter setting mode.
5. Press C to advance hour digit forward; press D to advance digit backwards.
Press B to save and advance to minute setting.
6. Press C to advance minute digit forward; press D to advance digit backwards.
Press B to save and advance to Time selection.
7. Press C or D to change which time mode (Time 1/Time 2) the Alarm will
read from.
8. Press A to exit setting mode.
NOTE: Alarm will sound for 20 seconds. Press any pusher to silence alarm.
Countdown Timer
1. Press B to change to Timer Mode.
2. Press C to start the timer; press D to stop the timer.
3. Press and hold D 3 seconds to clear the countdown and reset the timer.
4. In Timer Mode, press and hold A 3 seconds to enter timer setting mode.
5. Press C to advance hour digit forward; press D to advance digit backwards.
Press B to set and advance to minute setting.
6. Press C to advance minute digit forward; press D to advance digit backwards.
Press B to set and advance to seconds setting. Press B to return to hour setting
if necessary.
7. Press A to exit timer setting mode.
To Next Page
Loading...
