Michelin 009552 - Remaining Risk; Troubleshooting; Problem Resolution

11
EN
RESOLUTION DE PROBLEMES
Symptom Possible cause Corrective action
The jack does not
lift the load
or
Lifting is dicult
• Overloaded
• Jack has seized up or is
damaged
• Keep within the jack’s allowable load
capacity
• Use the right jack for the load
• Have a specialist check the jack
The jack does not
hold the load
!! DANGER !!
• Overloaded
• Incorrectly positioned jack
• Support the load with jack stands and
use a suitable jack
• Support the load with jack stands and
reposition the jack
The jack does not
lower the load. The
handle is hard to
turn
• Jack has seized up or is
damaged
• Support the load with jack stands and
use an operational jack
• Have a specialist check the jack
This product meets the European standard EN 1494:2000+A1:2008
European distributor: IMPEX S.A.S., 140 route des Moulins, 38490 Chimilin, FRANCE
User guide version : Feb 2018
BRAKE
Park your vehicle and apply the handbrake to avoid any
unexpected movement.
Use only on hard, level surfaces capable of supporting the
load marked on the jack.
Put the vehicle in gear before lifting, to avoid any unexpec-
ted movement.
REMAINING RISK