EasyManua.ls Logo

Michelin TOP UP MINI - Page 6

Michelin TOP UP MINI
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5.
If you are inflating multiple tyres and the automatic shut-down has activated or you switched the power
off between tyres you have to reset the inflation mode, pressure format and target pressure
(if different from the default settings). The inflator does not have an inbuilt memory.
Note this inflator does not have a automatic deflate feature. To deflate an over inflated tyre the quick
release connector will need to be removed and air bleed from the tyre valve.
WORKLIGHT
To switch the worklight on press (4) the lens of the worklight for 2 seconds. To switch off press the lens
(4) again twice. The first off press will change the light to a strobe effect.
Motorcycle mode: default pressure (flashing) is 34 psi. Adjustable range: 15-145 psi.
Ball mode: default pressure (flashing) is 8 psi. Adjustable range: 2-16 psi.
4. To change the pressure format with the inflator still in Step 2 turn the jog wheel anti-clockwise.
1 click = 1 format: PSI, BAR, kPa.
Free mode: pressure can be adjusted freely. Adjustable range: 3-145 psi.
Car mode: default pressure (flashing) is 32 psi. Adjustable range: 14-51 psi.
5. The pressure setting will appear (and the battery icon) and flash 3 times after approx. 5 seconds to
confirm the new settings after which the power button has to be pressed for 2 seconds again to
make any further changes to inflation mode or pressure format settings.
To set a target pressure and pressure format
To set a target pressure simply turn the jog wheel clockwise to increase the pressure or anti-clockwise to
reduce the pressure. The pressure setting will flash 3 times after approx. 5 seconds to confirm the new
setting or a quick press of the power button with confirm the setting.
To change the pressure format (PSI, BAR, kPa) follow Step 2. in
Tyre Inflation.
Turn the jog wheel anti-clockwise to change the format, 1 click = 1 format: PSI, BAR, kPa.
The pressure setting will appear (and the battery icon) and flash 3 times to confirm the new setting or
a quick press of the power button with confirm the setting.
Car mode
Motorcycle mode
Ball mode
Free mode
Fig 3

Related product manuals