To Next PageTo Next PageWhat to do if my Michi Amplifier has no sound?
If your Michi Amplifier isn't producing any sound, here are a few things you can check: * First, verify that your signal source is working correctly. * Next, ensure that the cables connecting the signal source to the P5 inputs are properly connected. * Finally, inspect all the wiring between the P5, the power control amplifier, and the speakers.
How to troubleshoot a Michi Amplifier when the power indicator is not illuminated?
If the power indicator on your Michi Amplifier isn't lit, try these steps: * Test the power outlet by plugging in another electrical device, like a lamp, to see if the outlet is working. * Check all AC power connections, including the rear power switch, to ensure the unit is receiving power.
General| Type | Stereo Preamplifier |
|---|---|
| Inputs | XLR, RCA |
| Outputs | XLR, RCA, Headphone |
| Dimensions | 485 x 150 x 452 mm |
| Weight | 22.9 kg |
| Input Impedance | 100kΩ |
| Output Impedance | 100Ω |
| Gain | RCA: 12dB, XLR: 6dB |
| Frequency Response | 10Hz - 100kHz (±0.3dB) |
| Intermodulation Distortion | <0.004% |
| IMD (SMPTE) | <0.004% |
General safety advice for users regarding service and environmental exposure.
Warnings against water, liquids, and foreign objects entering the unit.
Instructions on ensuring adequate airflow and avoiding heat sources.
Guidelines for protecting the power cord and ensuring proper plug usage.
Directives to seek qualified personnel for all servicing and repairs.
Advice on climate, ventilation, and avoiding open flames near the unit.
Information on connecting the unit to power and disconnecting it.
Notes compliance with FCC Rules, subject to specific conditions for operation.
Indicates the unit is double insulated, meaning an earth connection is not required.
Important warnings to prevent system damage, especially regarding connections and speaker wires.
Recommendations for optimal placement to avoid hum, interference, and ensure remote signal reception.
Guidance on selecting and routing cables to minimize noise and interference.
Information on AC power input, voltage configuration, and master power switch.
Details on using 12V trigger outputs to automatically turn other components on/off.
Instructions for connecting various analog and digital audio sources to the unit.
Information on connecting the unit's outputs to other audio components or subwoofers.
Details on Bluetooth connectivity, rear USB power port, EXT REM IN, and RS232 integration.
Instructions for PC-USB audio playback and network connectivity for updates and control.
Description of front panel controls, remote sensor, display, and basic button functions.
Navigating the setup menu and configuring input sources with custom options.
Setting up network parameters and configuring audio modes, bass, and treble.
Adjusting display brightness, temporary display settings, and system configurations like Auto Power Off.
Guidance on resolving common difficulties related to connections, settings, and sound output.
Steps to diagnose and resolve issues with the unit's power indicator light.
Procedure for replacing the internal power fuse, requiring dealer assistance.
Checklist for troubleshooting the absence of sound, focusing on sources and connections.
Details on supported audio formats for Bluetooth, PC-USB, and Coaxial/Optical inputs.
Comprehensive list of technical data including distortion, sensitivity, frequency response, and dimensions.
