Michi P5 - Technical Specifications

17
English
Specifications
Total Harmonic Distortion (20 Hz - 20k Hz) < 0.002%
Intermodulation Distortion (60 Hz : 7 kHz, 4:1) < 0.002%
Input Sensitivity / Impedance
Phono Input (MM) 2.5 mV / 47k ohms
Phono Input (MC) 250 uV / 47k ohms
Line Level Inputs (RCA) 160 mV / 47k ohms
Line Level Inputs (XLR) 250 mV / 100k ohms
Input Overload
Phono Input (MM) 199 mV
Phono Input (MC) 22 mV
Line Level (RCA) 12 V
Balanced (XLR) 12 V
Output Level
Line Level (RCA) 1 V / 470 ohms
Balanced (XLR) 2 V / 100 ohms
Frequency Response:
Phono Input 20 Hz - 20k Hz, 0 ± 0.3 dB
Line Level Inputs 10 Hz - 100k Hz, 0 ± 0.3 dB
Tone Controls
Bass ± 10 dB at 100 Hz
Treble ± 10 dB at 10k Hz
Signal to Noise Ratio (IHF”A” weighting)
Phono Input 80 dB
Line Level Inputs 116 dB
Channel Separation
Phono Input > 55 dB
Line Level Inputs > 85 dB
All specifications are accurate at the time of printing.
Digital Section
Frequency Response 20Hz - 20kHz (±0.3 dB, Max)
Signal to Noise Ratio (IHF “A” weighting) 100 dB
Input Sensitivity / Impedance 0dBFS / 75 ohms
Digital Output 0.75 V, Peak to Peak
Load Impedance 75 ohms
Digital Inputs SPDIF LPCM
(up to 192kHz 24 bit)
PC-USB USB Audio Class 1.0
(up to 96kHz 24 bit)
USB Audio Class 2.0
(up to 384kHz 24bit)*
*Driver installation required
DSD (up to 11.2MHz 16bit)
and DoP support
MQA support
General
Power Requirements:
USA: 120 Volts, 60 Hz
EC: 230 Volts, 50 Hz
Power Consumption 40 watts
Standby
Normal < 0.5 watts
Network Wakeup < 2 watts
BTU 87 BTU/h
Dimensions (W x H x D) 485 x 150 x 452 mm
(19 x 6 x 17
3
/
4
ins.)
Front Panel Height 132 mm, 5
1
/
4
ins.
Weight (net) 22.9 kg, 50.5 lb.
Michi reserves the right to make improvements without notice.