5.2 DESCRIPTION OF BUTTONS ON MODELS WITH
DIGITAL CONTROLLER
The Pro-Line™ dispenser is designed to maintain keg temperature within the most desirable
range of 34° to 38°F. You can expect the Pro-Line™ unit to maintain temperature with the proper
temperature control setting and in a normal environment. If a different setting is desired, follow
these instructions to adjust the thermostat.
SYMBOL MODE OPERATION
On Compressor enabled
Flashing Anti short cycle delay enabled (AC parameter)
On Defrost in progress
Flashing Dripping in progress
On Measurement unit
Flashing Programming mode
On Measurement unit
Flashing Programming mode
SYMBOL OPERATION SYMBOL OPERATION
To display target set point, in
programming mode it selects
a parameter or conrms an
operation
In programming mode it
browses the parameter codes
or increases the displayed value
To start a manual defrost
(only XR02CX)
In programming mode it
browses the parameter codes or
decreases the displayed value
| 10
PRO-LINE E-SERIES REFRIGERATION USER GUIDE AND SET UP MANUAL
To Next Page
Loading...
