Micro Seiki BL-51 User Manual

List of accessories provided with the turntable that should be checked before assembly for completeness.

Instructions for attaching the belt to the platter and pulley, ensuring correct alignment for smooth rotation.

Procedure for cutting the mount base to fit the tonearm based on its effective length for proper installation.

List of compatible tonearms for the BL-51, specifying various models from manufacturers like MICRO, SME, and Grace.

Steps for mounting the tonearm base, checking its swing angle, and securing it properly to the turntable unit.

Guide to attaching the dust cover bracket and adjusting screws for a free-stop mechanism that closes smoothly.

Instructions for connecting the turntable's ground wire to the amplifier and plugging the power cord into an AC outlet.

How to adjust rotation speed using the strobo sheet and select between 33 1/3 and 45 RPM playback speeds.

Information on the oil-bath center shaft, its durability, and warnings against removing the rear cap to prevent oil leakage.

Recommendations for replacing the drive belt periodically and notes on the motor's special oil that requires no lubrication.

Advice on installation to avoid magnetic flux interference, vibration, and ensuring a perfectly flat, level surface.

Description of the lightweight, rigid carbon fiber headshell and its plug-in system for optimal signal transmission.

Explanation of the anti-skating adjustment and the smooth, automatic oil-damped cueing system for stylus protection.

Detailed specifications for the MA-701 tonearm, including dimensions, tracking angles, and recommended cartridge weights.