Micro X21 - Brake Operation

22
Operating the motor brake
In order to activate the motor brake, press the thumb throttle on the le side of the
handle bar. When the scooter is o or without battery, the motor brake is not working.
The motor brake is not the most eective brake of this scooter. For emergency brakes
always use both brakes
EN
Operating the hand brake
To activate the hand brake (disk brake on the rear wheel), pull the right hand lever.
The disc brake has to be always properly tuned through the adjuster next to the hand
lever. If this is not enough, adjust the caliper side in the rear wheel using a 5mm Allen
wrench.
Micro_X21_Book.indb 22Micro_X21_Book.indb 22 21.06.21 16:0821.06.21 16:08