Need help?Do you have a question about the Microbrain Intelligent Technology ITS-AX2 and is the answer not in the manual?
Describes the function of the red and green LED indicators on the radar's front surface.
Explains how to configure the radar's detection area using mobile APP or PC software.
Details automatic saving of detection area and reloading after power failure.
Describes online firmware upgrade process via RS-485 or APP interface.
Details the correct placement of the radar, including distance from barrier and height from ground, facing direction.
Describes drilling an M16 mounting hole on the gate box surface, recommending a 16mm diameter.
Illustrates the process of inserting the radar through the hole and securing it with an M16 nut.
Details connecting the red wire (VCC) to the positive terminal and black wire (GND) to the negative terminal of the 12V power supply.
Explains connections for normally open/close signals and control line to loop detector interface.
Specifies connecting the gray line to RS-485 T/R + and the white line to RS-485 T/R -.
Provides the Bluetooth name "Radar..." and user password "88888888" for pairing.
Guides users through debugging via mobile APP, including connecting to the radar via Bluetooth.
Explains how to configure radar detection area, learning environment using "Barrier Setting" software.
Covers configuring sensing range, boundaries, custom parameters, and managing settings with Get, Set, and Default functions.
Details the process of background recording for straight boom barrier types, involving keeping the bar raised and clicking 'Record'.
Addresses common operational problems and their causes, including detection issues and power indicator behavior.
General| Brand | Microbrain Intelligent Technology |
|---|---|
| Model | ITS-AX2 |
| Category | Radar |
| Language | English |
To Next Page