EasyManua.ls Logo

MicroFridge MHR-2.7E - Assembly and Installation Requirements

Default Icon
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3. Plug your oven and refrigerator into a standard
120- volt/60Hz household outlet. Be sure the electrical
circuit is at least 15 amperes and that your microwave
oven is the only appliance on the circuit.
NOTE:
ReFrigerator C
plugs into ax
outlet.
De
NOTE: If your oven does not operate properly, unplug it from the 120
volt household outlet and then plug it back in. This unit is not designed for
50Hz or any circuit other than 120 volt/60 Hz AC current.
Proper Air Circulation
Toassureyourrefrigeratorworksatthemaximumefficiencyit
was designed for, you should install it in a location where there
is proper air circulation, plumbing and electrical connections.
The following are recommended clearances around the refrigerator:
Sides……………3/4 "(19mm)
Top....................2" (50mm)
Back..................4" (50mm)
6
English

Related product manuals